A:
IIoT "door monitoring" bundle
Enclosures protect the devices inside, and also protect humans from electric shocks. To ensure that both these functions are permanently guaranteed, enclosure doors should never be left open during regular operation. With the IIoT "door monitoring" bundle, the door status (open / closed) is supplied via Ethernet and can be monitored from anywhere in the world.
CMC III sensors
CMC III access sensor
Preview image for: CMC III CAN bus connection cable
7030120
CMC III CAN bus connection cable
Connects CAN bus units for information and power transmission.
7030093
B:
IIoT "fire detection" bundle
Damaged and defective conductors increase the risk of fire in a switchgear system. The IIoT "fire detection" bundle ensures that fires are reliably detected as they start to develop. In addition, the smart network-powered smoke detector automatically transmits the signal to higher-level alarm centres so that fire-fighting measures can be initiated promptly if necessary.
CMC III sensors
CMC III smoke detector
7030400
CMC III CAN bus connection cable
Connects CAN bus units for information and power transmission.
7030093
C:
IIoT "temperature monitoring" bundle
Temperatures are a critical indicator of the lifetime and performance of electronic components. In addition, the temperatures in the machine bed are crucial to process and component accuracy. With the IIoT "temperature monitoring" bundle, temperature readings in switchgear and machine beds may be supplied via Ethernet and monitored from virtually anywhere in the world.
CMC III sensors
CMC III temperature sensor
7030110
CMC III CAN bus connection cable
Connects CAN bus units for information and power transmission.
7030093
D:IIoT "humidity monitoring" bundle
Enclosures sited outdoors are often exposed to temperature fluctuations and high levels of humidity. This leads to the formation of condensation which can cause serious damage to switchgear, such as flashovers or short-circuits. With the IIoT "humidity monitoring" bundle, the relative humidity inside the enclosure is relayed via Ethernet and can be monitored from anywhere in the world.
CMC III sensors
CMC III temperature/humidity sensor
7030111
CMC III CAN bus connection cable
Connects CAN bus units for information and power transmission.
7030093
E:
IIoT "access control" bundle
Access to control cabinets with safety-critical and sensitive electronics must be limited to authorised persons. Unauthorised access can soon lead to serious damage. With the IIoT "access monitoring" bundle, access to the enclosures can be centrally administered via the network, with no need for keys or lock systems.
CMC III CAN bus access
7030200
CMC III CAN bus connection cable
Connects CAN bus units for information and power transmission.
7030093
Handles, electromagnetic for CMC III and IoT Interface
Handles may be integrated into various enclosure systems.
7320721
Transponder reader for CMC III
Reader units for controlled door opening using transponders.
7030230
F:IIoT "condition monitoring, Blue e" bundle
Digitalization and networking offer huge opportunities for any company. In conjunction with the IoT interface (3124.300)
Blue e IoT adaptor
In conjunction with the IoT interface (3124.300), the adaptor supports intelligent networking of cooling units in the Blue e series.
3124310
CMC III CAN bus connection cable
Connects CAN bus units for information and power transmission.
7030090
Tender text
Description:
The IoT interface is a central component for the intelligent networking
of Rittal cooling solutions or sensors for monitoring physical ambient
conditions.
Equipped with a wide range of interfaces and protocols, it is used to
collate and transmit data to superordinate IT systems or to systems for
the local monitoring of machine statuses.
Benefits:
Digitalisation and networking offer huge opportunities for every
company.
With the IoT interface, Rittal cooling solutions and sensors for
monitoring physical ambient conditions are easily connected to Industry
4.0 environments without affecting the automation logic.
Plug and run: The IoT interface is quickly and conveniently configured
and commissioned via the integral Web server, no programming required.
Dimensions:
18 x 117 x 120 mm
Material:
Plastic to UL 94-V0
Colour:
RAL 7016 Anthrazitgrau
Protection category IP to IEC 60 529:
IP 20
Note:
The IoT interface is only supported by Blue e+ cooling units from
firmware version 1.11.0 or above. If applicable, update the firmware
using the RiDiag III software (3159.300).
To interlink cooling units in the Blue e series, the Blue e IoT adaptor
(3124.310) is additionally required.
Supply includes:
IoT interface
USB cable (USB-A connector on micro-USB-B connector)
Angle bracket for Blue e+ cooling unit
Protocols:
SNMP
OPC-UA
Modbus/TCP
CAN-Bus
Profinet