Rittal enclosures authorization password can be set in CMC-TC via WEB-Rittal cabinet Rittal electrical cabinet Rittal air conditioner Rittal fan Rittal PDU Rittal busbar
Source: edited by this website
Author:stationmaster
4/3/2024
84
author:Rittal cabinet, rittal cooling
key word:Rittal cabinet, rittal cooling, rittal busbar, rittal fan, rittal electric cabinet
Rated voltage: 24V DC
Interface: RS232/P-I2C
Transmission technology:Legic transponder
Carrier frequency: 13.56MHz
Protection level: IP40
Temperature usage area: +5°C to +40”C
Scope of supply:
Rittal cabinet TS8 handle with transponder antenna and sound/image display Legic unit B-Net9106 with RS232/P-2C interface
-3 transponder cards
PUII's serial interface RS232 can only occupy one accessory module or one Legic unit.
In Example 2 only the last 4 transponder symbols are processed
In RS232 applications the connecting cable (PUILegic unit) DK7320.814 is required
Contact magnetic card reader/
Contactless magnetic card reader
password
Rittal enclosures door handles can only be used after an authorized person has confirmed their identity using a contact magnetic card/non-contact magnetic card/password lock. Contact magnetic card reader/non-contact magnetic card reader, the combination lock is installed above the handle of the Rittal cabinet and can be used as a central unit to open several doors at the same time.
Rated voltage:
24V DC
Rated current: maximum 20mA
Contact magnetic card type: 2C type chip
Contactless magnetic card type: magnetic stripe card with data stored on the second magnetic track
This type of reading system is designed for both high magnetic and low magnetic cards.
Rittal cabinet contact magnetic card readers/non-contact magnetic card readers/password locks can only be combined with CMC-TC for electric locks. Contact magnetic card reader/contactless magnetic card reader with 3 cards. Each card contains a four-digit password, and the four-digit password is different for each of the three cards. All cards have access. All password locks can directly output the password.
The Rittal enclosures authorization password can be set in CMC-TC via WEB. The set password can be transmitted to CMC-TC through the I2C bus and, if necessary, transmitted to the network management system. Each reader is designed as a mounting adapter for the TS8 aluminum glass door of Rittal electric cabinet.
Further reading
Rittal cabinet、Rittal enclosures、Rittal Air Conditioner、Rittal electric cabinet
Quick navigation
rittal cooling,rittal busbar, rittal fan,rittal electric cabinet ,rittal fan and filter,rittal air conditioner,rittal lock,rittal panel lock,rittal enclosures,Cabinet factory,Chinese cabinet factory,Chinese sheet metal factory,Cabinet customization,china Rittal,china Rittal cabinet,china Rittal Air Conditioning