VX IT,19"mounting angles,standard,front and rear,glazed door,WHD:800x2100x1000mm,42U,pre-configured.
Sheet steel
Aluminium
Glazed door: Single-pane safety glass,3mm
Enclosure frame: Dipcoat-primed
Interior installation: Spray-finished
Rear door and roof: Dipcoat-primed, powder-coated
Front door: Aluminium, anodised/spray-finished
■ Rittal enclosures Colour
Front door: Vertical sections, silver coloured and horizontal sections, RAL 9005
Interior installation, vent grille at the front: RAL 9005
Handle and hinges: RAL 9005
VX enclosure frame with doors and roof plate
Glazed aluminium door at the front, 180° hinges
Sheet steel rear door, solid, one-piece, 130° hinges
Lock front and rear: Comfort handle for profile half-cylinders and security lock 3524 E
Mounting angles, 482.6 mm (19")
Roof plate, one-piece, solid
Base tray with gland plate, multi-piece, solid
Baying seal and sealing kit for gland plates (supplied loose)
12 x 482.6 mm (19") fastener, 1 U, conductive (supplied loose)
25 multi-tooth screws, conductive (supplied loose)
IPPC pallet
Width: 800mm
Height: 2000mm
Depth: 1000mm
42U
87mm/193mm
on depth stays, screw-fastened at the top and bottom
Pre-configured
one-piece, solid
482.6mm (19") mounting angles,standard in the VX IT
Base module mounted at front as infill panel
front and rear
15000N
12000N
IK08
IP 55 only in conjunction with baying seal or screw-fastened side panels
Depending on how and where it is sited,the door opening angle may vary for selected applications
Sheet steel
Sheet steel door, solid, vertically divided,180°hinges
Aluminium/sheet steel door,vented,one-piece,180°hinges
Packs of
1 pc(s).
Weight/pack
177kg