VX IT,19"mounting angles,dynamic,front and rear,vented,WHD:600x2200x1200mm,47U.
Sheet steel
Aluminium
Enclosure frame: Dipcoat-primed
Interior installation: Spray-finished
Rear door and roof: Dipcoat-primed, powder-coated
Front door: Aluminium, anodised/spray-finished
■ Rittal enclosures Colour
Front door: Vertical sections, silver coloured and horizontal sections, RAL 9005
Interior installation, vent grille at the front: RAL 9005
Handle and hinges: RAL 9005
VX enclosure frame with doors and roof plate
Aluminium/sheet steel door at the front, vented (vented surface area approx. 85% perforated), 180° hinges
Sheet steel rear door, vented (vented surface area approx. 85% perforated), vertically divided, 180° hinges
Lock front and rear: Comfort handle for profile half-cylinders and security lock 3524 E
Mounting angles, 482.6 mm (19")
Spacers, height 50 mm, to raise a cover plate above the fan cut-out in the roof plate, for passive cooling (supplied loose). Not required for variants without a cut-out.
12x482.6 mm (19") fastener,1U,conductive (supplied loose)
25 multi-tooth screws, conductive (supplied loose)
IPPC pallet
Roof plate, multi-piece, with side cable entry in the depth, double-sided, prepared for fan mounting plate.
Width: 600mm
Height: 2200mm
Depth: 1200mm
47U
150mm/325mm
front and rear
725mm
on depth stays, screw-fastened at the top and bottom.
dynamic
multi-piece, with side cable entry in the depth, double-sided, prepared for fan mounting plate
482.6mm (19") mounting angles,standard in the VX IT
Open
482.6 mm (19") level,front and rear
18000N
15000N
Depending on how and where it is sited,the door opening angle may vary for selected applications
Sheet steel
Sheet steel door,vented,vertically divided,180°hinges
Aluminium/sheet steel door,vented,one-piece,180°hinges
Packs of
1 pc(s).
Weight/pack
95.1kg