VX IT,19" mounting angles,standard,standard,front and rear,vented,WHD:600x2200x1200mm,47U.
Sheet steel
Aluminium
Enclosure frame: Dipcoat-primed
Interior installation: Spray-finished
Rear door and roof: Dipcoat-primed,powder-coated
Front door: Aluminium,anodised/spray-finished
Front door: Vertical sections,silver coloured and horizontal sections,RAL 9005
Interior installation,vent grille at the front: RAL 9005
Handle and hinges: RAL 9005
VX enclosure frame with doors and roof plate
Aluminium/sheet steel door at the front,vented (vented surface area approx. 85% perforated),180°hinges
Sheet steel rear door,vented (vented surface area approx. 85% perforated)
Lock front and rear: Comfort handle for profile half-cylinders and security lock 3524 E
Mounting angles,482.6mm (19")
Spacers,height 50mm,to raise a cover plate above the fan cut-out in the roof plate,for passive cooling (supplied loose).Not required for variants without a cut-out.
12 x 482.6mm (19") fastener 1 U,conductive (supplied loose)
25 multi-tooth screws,conductive (supplied loose)
IPPC pallet
Roof plate,multi-piece,with cable entry in the corner sections front and rear
Sheet steel rear door,vented,vertically divided,180°hinges
Width: 600mm
Height: 2200mm
Depth: 1200mm
47U
150mm/330mm
front and rear
720mm
with mounting bracket screwfastened to the frame at the top and bottom.
Standard
multi-piece,with cable entry in the corner sections front and rear
482.6mm (19") mounting angles,standard in the VX IT
Open
front and rear
15000N
12000N
Depending on how and where it is sited,the door opening angle may vary for selected applications
Sheet steel
Sheet steel door,vented,vertically divided,180°hinges
Aluminium/sheet steel door,vented,one-piece,180°hinges
Packs of
1 pc(s).
Weight/pack
85.1kg
Customs tariff number
94032080
EAN
4028177945364