coding pin
Coding pins are used for coding of connecting components. It prevents components from being used on unlicensed slots.Rittal electric cabinet leads are plugged into the connection device of the coded plug-in board guide rail and the V.IVs and VChuan I-type plug-in and pull-out power handles (4 positions possible). Each plug-in board rail has 64 coding possibilities. There are 4096 possible combinations in the coding of the upper and lower plug-in board guide rails. standard:
IEEE1101.10.IEC60,29797-5-104 material:
coding tools
For simple installation of coded leads. Up to 3 coding leads can be installed simultaneously. An integrated centering pin simplifies positioning.
Polycarbonate, basic material according to UL94-vo
Plug-in board puller/
Plug-in board safety protection device
The two-stage plug-in board puller is used for fixed protection and extraction of panelless circuit boards. The lower part can also be used alone as a fixed protection for plug-in cards.
Material:
Polycarbonate, basic material according to UL94-vo
Cover plate
Cover plate for the entire depth of the RipacEco module box.
Available in open or closed type
The partitions are pushed into the horizontal connecting rails
Optional fixed feet can be used as additional support
Steel plate, galvanized
Cover plate, form 1
For RipacVario.RipacVarioEMC.RipacCompact.RipacVarioMobil and RipacSolid
Cover plate for the entire depth of the PLC control cabinet component box
Flat form for upper and lower
Optional closed or open hole type
Material:
1.0mm raw aluminum, hole diameter 4mm in cutout form Scope of delivery of the kit:
2 cover plates,
8 fixed parts each 28.5mm, 24 fixing screws Rittal after-sales.
Scope of supply per piece: 1 cover plate.
If used in EMC (Electromagnetic Compatibility) applications, additional fastening components must be installed over the entire depth of the module box.