1 module (maximum 16A per module).1cable bus,
1 input cable,24V DC.
Also required:
Standalone operation without CMC-TC requires a separate power supply (100-240V AC/24V DC) (DK7201210) and corresponding connecting cables.
Active PSM,8 channels can be switched individually
This Rittal cabinet module has 8 current outputs with IEC320C13 slots. Each of the 8 slots can be switched individually (via the CMC-TC system). In addition, a current display, a current loop display and an overheating protection device are integrated in the module.This Rittal electric cabinet module has double the length of a PSM standard module, so that up to 2 modules can be plugged into a 1200mm long PSM busbar, and up to 3 modules can be plugged into a 2000mm long PSM busbar. module.
The driver of this type of module requires power supply DK7201210 and a connecting cable. It can drive up to 2/3 of the modules on one PSM bus (1200/2000mm) with one power supply.
Useful functions of Rittal Air Conditioner: current display, current loop display and automatic select on switch.
The module is driven by CMC-Tc:
Additional power supply is required, the module is powered via the CMC-TC system. Up to 4x4 modules can be connected to one processing unit II (DK7320.100).
Useful functions of the Rittal Air Conditioner: current display, current loop display, automatic selection on switch, access to the network through CMC-TC: 8 current output terminals can be switched independently, current limit value monitoring, delay switch of a single current output, Module status display.
DK7320100CMC-TC processing unit
DK7320425CMC-TC power supply 24V input 100-230V AC
DK7320440CMC-TC1U mounting unit
DK7320472CMC-TC sensor unit connection cable 2m
DK7200210CMC-TC connecting cable D230V AC (specific forms according to each country) DK7200221CMC-TC programming cable