Server Rittal enclosures are equipped with power distribution solution PSM power system modules. This type of smart packaging Rittal cabinet is based on the successful Rittal TS8 control cabinet system, which provides the ideal basis for your IT infrastructure. This server Rittal enclosures is equipped with the power distribution solution PSM (Power System Module). In addition, it comes with versatile accessories for assembly and cable routing.
Structure:
welded frame
The ventilation area of Rittal Air Conditioner is larger than 78% of the total area of the orifice plate. There is a 4-point lock system on the door.
The door fixing direction can be changed and no machining is required. It is fixed to the side panel with screws from the inside.
Cable entry via the top and bottom of the Rittal cabinet Can be combined at all levels
The static bearing capacity can reach 1000kg PSM busbar 2m.
Can be used with up to 7 PSM modules
Material: steel plate Color: RAL7035 surface treatment;
Box frame: Dip primer,
Flat parts are dip-coated with primer and powder-coated in color RAL7035 (light grey).
19" Mounting Frame: Galvanized, Chromate Passivated 19" Mounting Frame
It has a static bearing capacity of up to 1000kg on a 19~ plane. The layer spacing of the two 19~ frames is infinitely adjustable and can match the necessary dimensions of the installation kit provided by the server manufacturer, so it can be installed in almost all server types.
Door/Siding
Among the large-area ventilation doors at the front and rear, the vent area of the Rittal Air Conditioner is greater than 8% of the total area of the door panel, thus preventing the specified server air guidance from being affected.
Influence. Hot air can be easily discharged from the back. The installation is fully protected against unauthorized manipulation by the door's 4-point lock (the door can be fixed with a 130° chain) and the screw-fastened side panels. On the TS comfort handle system for special-shaped half-circle locks, the lock included in the scope of delivery can be replaced at any time with a lock specifically requested by the customer.
Plug-and-play power distribution
The plug-and-play power distribution solution PSM (Power System Module) has been integrated in Gongguang for a long time and is pre-equipped with selected modules. Can be expanded at any time with up to 4 modules with different plug diagrams. The necessary connecting cables for the current bus input are also included in the scope of delivery.
Cable management
Cable introduction can be done through the base or through the separate top plate. In this way, server integration can begin immediately after delivery of the Rittal enclosures.Other multifunctional accessories for assembly, cable routing and fixing are also included in the scope of delivery.