author：Rittal cabinet, rittal cooling
key word：Rittal cabinet, rittal cooling, rittal busbar, rittal fan, rittal electric cabinet
PLS expansion connector
key word：Rittal cabinet, rittal cooling, rittal busbar, rittal fan, rittal electric cabinet
PLS expansion connector
Used for thermal compensation and mechanical compensation of PLS special bus when connecting from Rittal cabinet to Rittal electric cabinet.
Material Science:
E-cu
explain:
The length of the Rittal bus will expand by approximately
0.5mm/m。 Therefore, it is recommended to use an expansion connector in bus systems with bus section>36oomm to achieve thermal balance.
Rittal Air Conditioner Riline Accessories
Laminated copper Rittal busbar
Length: 2000mm/piece Material:
Bluff sheet
High purity electrolytic copper F20
Rittal cabinet insulation
A high-strength ethylene compound with an expansion degree of 3709%
- Temperature range: - 30 ° C+ 105 ° C - fire resistance according to UL94 vo - dielectric strength: 20kv/mm
Universal Bracket
Used to fix 5x20x1 to 10x63x1mm laminated copper busbar for Rittal electric cabinet.
Rittal Air Conditioning Materials:
Polypropylene fiber reinforced thermoplastic polyester (PBT) - fire resistance according to UL94 vo
Color:
RAL7035 Supply Country:
The second includes screws and U-nuts for fixing the bracket to the PS punching rail
Universal Bracket
For fixing single or multiple laminated copper Rittal busbars from 5x40x1 to 10x100x1mm.
Material Science:
Polypropylene fiber reinforced thermoplastic polyester (PBT) - fire resistance according to UL94 vo
Color:
RAL7035 Supply Scope:
Includes screws and sliding nuts. Used to secure the bracket to the C-rail
Support shield for cover plate
Used to prevent holding the cover plate from the side. In addition, the support shield can provide higher stability.
Recommended installation spacing: ≤ 500mm Material:
Polyamide (PA6.6)
Fire resistance according to UL94 vo color bump:
RAL7035
Spacer
Used for PLC control cabinet RiLine bus connection. 3-pole
Creepage distance used to comply with the "feed circuit" requirements of UL508. For flat bus systems with a bus center distance of 6 mm and PLS800/1600.
Material of PLC control cabinet:
Polyamide (PA6.6)
Fire resistance according to UL94 vo color bump:
RAL7035 Description:
Two separation plates are required for one bus connection
Quick navigation
Rittal cabinet, rittal cooling, rittal busbar, rittal fan, rittal electric cabinet
Online QQ